TAPICER adhesive

TAPICER spray adhesive 500 ml for foam on fabrics

He is the undisputed leader in bonding upholstery materials. It is used by drivers for renovating their cars, RVs, and motorboats. It is used by Polish furniture factories. Adheres polyurethane sponge, polyester sponge, satin fabrics, felt, jute, furniture rubber, carpets, etc. It has very good durability confirmed by conducted experiments, as an adhesive used on concrete, metal, raw and painted wood, as well as asbestos boards. All the mentioned materials can be bonded in mutual compositions. Ideal for gluing car headliners. super glue for upholstery.

APPLICATION: for bonding polyurethane and polyester foam and other upholstery materials in various combinations to raw and lacquered wood and wood-based materials.

WARNING: Harmful effects on human health. The product is irritating and harmful to health. Irritates the skin. May cause increased sensitivity upon contact with skin. Harmful if inhaled; poses a serious health threat due to long-term exposure. Possible risk of impaired fertility. Pairs can induce feelings of drowsiness and dizziness. Harmful effects on the environment. Toxic to aquatic organisms; may cause long-term adverse changes in the aquatic environment. Harmful effects related to physical and chemical properties. Highly flammable liquid. The vapors form explosive mixtures with air. Vapors are heavier than air, accumulating at ground level and in the lower parts of rooms. Ignition of the product and its pair is possible from an open flame and spark, hot surface.

TECHNICAL DATA: Lp. Requirements for the tested feature 1. Dry weight 40% ± 2 2. Viscosity (Ford cup Ø6) 80 ÷ 120 s 3. Specific gravity approx. 0.8 g/cm3 4. Pink color 5. Opening hours 1 ÷ 20 minutes 6. Peel strength PU foam - PU foam Foam delamination on the surface at least 50%.

INSTRUCTIONS FOR USE: Thoroughly mix the glue before use. Condition the bonded materials and adhesive to a temperature of 18 - 25°C. Apply glue to one side on flat surfaces and to both sides on materials with high load. The adhesive performance is 70 – 100 g/m2. Bonded elements should be joined and pressed before the open time expires. The adhesive performance is 70 - 100 g/m2.

Storage: Store in the original packaging in a dry and cool room (5-25 oC). Protect from frost. Do not store in close proximity to heat sources.